Pages

Saturday, October 6, 2012

It is not a dream: How to clean (ballet) costumes

 There was a time when people were afraid to wash: themselves, their homes, their clothing. As a result people well, ...stank. At some point in time we discovered that by washing our bodies, our clothing and our homes we not only smelt better, we prevented disease and clothing lasted longer.
In the ballet world there was (and sad to say still is) a superstition or false belief among some that washing is bad for costumes.
Incorrect cleaning could potentially damage a costume but not cleaning, well it is simply disgusting as dancers sweat, a lot. If an item of clothing is simply hung back into storage after wearing, it can accumulate mold and bacterial growth, besides the worst b.o. imaginable.
Can and should you clean costumes?
The simple answer is yes; the more complicated answer follows.
Besides general hygiene, cleaning a costume before it is returned to storage greatly increases the life expectancy of the costumes. Sweat, oils from the skin and other bodily secretions rot fabrics, especially natural fabrics (silk, rayon, cotton). Synthetics such as polyester, nylon and acetate will also deteriorate over time when not cleaned. This is more due to the bacteria and molds that grow and feed on the sweat and skin cells than the bodily fluids themselves.
A ballet tutu is largely made up of nylon net and the pants are either nylon/spandex or cotton bobbin-net. The basque (part at the waist) can be made from silk, cotton, cotton/rayon or nylon; again all washable. Bodices can be made of a wide range of fabrics, most of which can be washed but here it can get tricky. If the fabrics were not washed before being made into the bodice they could potentially run or shrink. Often spot cleaning or dry-cleaning can be used.
To clean a ballet costume first find out what it is made of. Next if possible remove any decorations. Often decorations are applied to a plate or overlay that is tacked to the tutu and the bodice.  Only Swarovski hot-fix crystals have a patented glue that is dry-cleanable.
For the tutu, soaping and then thoroughly rinsing the crotches with warm water is usually sufficient. A mild soap such as Orvus (OrvusWA paste, purchased at the tractor supply store) or hand soap such as Ivory works well. If needed (for blood, urine or other stains) you can make a paste or soak the crotch in a product such as Biz or Oxyclean. Rarely do you need to wash the whole tutu. If you do, soak in the bath tub or a small kiddy pool. Use a minimum of soap because the tutu net works as a huge bath scrubby and produces a lot of bubbles.
Always air dry costumes and if possible expose the items to sunlight for several hours. Just sunlight will kill both bacteria and mold if given enough time. The only down side of this is that (high doses of) U.V. light will over time break down synthetic fibers such as nylon, acetate and polyester.
For spot cleaning again Orvus or Quick and Brite work well. Quick and Brite is very good for wiping lipstick and other make-up stains off of tights and leotards.
For silk, adding a table spoon or two of distilled, white vinegar to the rinse water also helps to clean them.
Blue silk and lace peignoir from the 1930's, with original vintage buttons
I recently was given a large number of vintage items. All had been stored in a box in a basement and they smelled of mildew. I carefully hand washed every single item using Orvus soap, luke-warm or cold water and air + sun drying. Not only are they clean and no longer smell, their colors are brighter, the fabric is crisper and they will last for many more years.

A 1970's pants suit made of Indonesian Batik
Edwardian (1900's) black silk tulle with tambour style lace embroidery.
Cleaning ones costumes and Vintage items is simply protecting an investment of time and money.


Friday, October 5, 2012

What else is new?

I haven't posted for a while but I have been sewing a few things. I have been fortunate to have had a lot of (local) business lately both alterations and custom work.
African batik fabric, cut to be sewn into skirt
The custom work has been fun because I got to work with some gorgeous African Batiks. I made two skirts. One (which I did not photograph, sorry) required a careful matching of the intricate pattern. It turned out very well and was definetly not an "off the rack" item. The other skirt needed the "right" pattern to display the beautiful colors and unique patterns of the fabric. Together the cutomer and I choose a tiered skirt with a yoke waist and ruffled lower edge.  The skirt was more than a full circle which allowed us to show off the fabric's beauty but did not make a skirt that was so large to overwhelm the petite wearer.
Finished skirt
Today, I was able to hand over the skirt to the customer and not only did it fit perfectly, it looked stunning, so I was very happy with the result.
My next major project will be to start building tutus for my (rental) business. I have three dancer's who have volunteered to be models. Yesterday and today I drew new basque patterns using the techniques I learned at tutu school and I made some adjustments to the panty patterns I had made to get a better fit. I'll keep you posted about this process as I go along.

It's beginning to look a lot like....

I have been promising my dear husband (dh) a new pair of pants for, months. Either I have been too busy, too tired or just too unmotivated to get on with it.
Let me say, making a pair of well fitting, men's pants is hard! No wonder tailors used to have apprentices work for them for years. At a tailor's there are many specialized jobs: a cutter, a draper, a shirt maker even a button hole maker.
In this project I reverse engineered a pattern from my husband favorite pants, then set about making new pants from a quality linen.
One of the things that is difficult (and different on dress pants) to draft is the pockets. Jeans have patch pockets in the back and an appliqued pocket on the front. Both types of pockets were discussed in the online class that I took.
I started by thread basting all the seam lines and the lengthwise and cross wise grains. After that everything was transferred to a piece of organza; then I made a paper pattern and then I cut out a muslin.

Original pants thread basted
I fitted these on dh and found that I needed to give him some more sitting room, and straighten the side seam. After making these changes to the pattern I  ran into a major hurdle: the pockets.
Dress pants have inset pockets, front pleats and back pockets with welts. It is very difficult to draft a good pocket pattern from the actual pants. Also, these were Australian pants, and they have some interesting (and highly desirable) features, including a change pocket hidden under the waist band.
After trying several things, becoming terribly frustrated because they just were not right, I broke down and bought a men's Vogue pattern. It had the inset pockets, the welt pockets and most importantly the instructions! Reading those was such an "aha, erlebness". Nothing is hard once you can "see" the solution. After that I sewed those pants up in no time flat (less than hour).
the pants! are ready to try on

Voila! here they are. I tried them onto dh and  by golly they fit perfectly. Alas, once I put the waistband on they seemed a bit snug, so I had to let them out a bit. After finishing them, I pressed and hemmed them, hung them up and forgot about them. The next day, dh asked me: Well what do you think of my pants? I gave him a strange look because I did not realize these were the new ones?!
That means I must have done a good job right?